Boat ownership in Australia is at an all-time high, this isn’t surprising seeing as how nearly 80% of the Australian population lives in coastal areas. That being said, if you have a boat, installing a good sound system is a great way to make your sea-faring adventures so much better!

One of the best sound systems for boats is tower speakers. These speakers are designed to be installed onto the towers of your boats, turning your boat into a party vessel on the high seas.

However, there are many tower speakers with subwoofers for boats out there, so let’s dive into what you need to consider when choosing one of these speakers and how to install them for the best music experience.

How to choose tower speakers with subwoofers for boats?

First, let's take a look at what you need to consider when choosing the ideal tower speakers with subwoofers for your boat:

Water resistance

Water resistance is the most important thing you need to look for when choosing tower speakers with subwoofers for your boat. You will want a speaker that isn’t just mountable but can also withstand moisture from your sea-faring adventures.

Try to look for speakers with an IP rating of IPX6 or IPX7—these speakers can withstand splashes of water and even direct rinsing.

Corrosion resistance

Sea water can be more damaging to speakers than rainwater because of its salt content. With this in mind, you will need to look for speakers with components resistant to saltwater corrosion. 

Check if the tower speakers you’re looking for should be made with marine-grade materials. This will indicate that the speakers have stainless steel components that are designed to withstand corrosion after coming into contact with seawater.

UV resistance

When you’re out on the water, your boat will be out in the sun for a while; lots of sunshine means a lot of UV rays. That being said, the ideal tower speaker for your boat should have good UV-resistant housing to protect its internal components.

Mounting capabilities

You don’t want your speakers rolling off the deck of your boat and falling into the water so you should find a tower speaker that can easily be mounted onto your boat’s canopy or railings. Also, make sure that the speakers are easy to install so that you can fit them onto your boat when you go sailing and remove them when they’re not in use.

How do I install my tower speakers?

Installing tower speakers the right way can be tricky. Here are some pointers to help get you started:

Planning 

The first thing you need to do before installing your tower speakers is to look for the ideal location to install them. You should also consider the swivel capabilities and the vertical angle of the speakers for optimal sound dispersion.

To attach your tower speakers to your boat, you should use rust-resistant clamps. These clamps will also allow you to adjust the angle of your speakers for improved sound dispersion. Most of the time, you won’t even need to buy these clamps separately as the speaker may come with them.

Also, you need to think about your speaker’s power requirement. The thing is, these speakers are hanging in the open air, and this can cause rapid sound dispersion. Additionally, your boat’s engine will be making a lot of noise and this can drown out the audio from the speakers too.

So the more power you can provide your speakers with, the better they will sound. Additionally, you should consider getting an external amplifier that has an RMS power rating that is the same or lower than your tower speakers for better sound quality.

Mounting considerations

Make sure that the tower speakers have some enclosed airspace behind them. Enclosed airspace can give resonance to the speaker’s output, which is essential for good midrange response and bass. 

If the space behind the speaker is too big, the sound might come out very weak. Also, before mounting the speakers, do a bench test to check for any problems with the sound quality.

Wiring

Many modern tower speakers come with a dedicated battery pack. If this is the case, you simply need to attach the speaker to the boat's towers and call it a day. 

But if your tower speaker needs to be connected to your boat’s power source with wiring, you may need to make some modifications to your boat’s towers. First, you’ll need to drill holes into your towers, if the towers don’t already have pre-drilled holes for speaker attachments.

Next, you need to carefully run the speaker wires through the tower, making sure that you pull out just enough wiring from the bottom of the tower to reach the amplifier. After doing this, you just need to connect the speakers at the top of the tower and the amplifier with the speaker wires.

Get the ideal tower speakers with subwoofers for boats today

Turn up the fun for your boating adventures with powerful tower speakers. With these speakers, you can and your mates can listen to your favourite tunes and party on the high seas, so start hunting for the perfect tower speakers for your boat today!

FAQs

What is the best height for a tower speaker?

Ideally, the tower speaker should be installed at ear level for an optimal audio experience.

How do I clean tower speakers?

Using a soft cloth, wipe off the grille and the outer casing. Try using a toothbrush to get to hard-to-reach areas. Also, don’t use any chemical cleaners.

How long does a tower speaker typically last?

If maintained the right way, a tower speaker can last for several years, even decades.

• Share this post: